Share Icon

Featured Products

 

 

NATURAL GAMMA PERMANENT TAG

N/G Product comes in a kit. This form is called “N/G Paste”. The radioactive source is blended with a *common thread compound used throughout the oil & gas industry. This product is applied to the threaded pin area of the pipe joint. Once applied continue standard operation of making up the pipe. Application instructions are included in every kit. To view our video on how to apply “N/G Paste” Click Here

APPLICATIONS

Tubing Conveyed Perforating (TCP)

Setting Sump Packers

Setting Downhole Assemblies

Any application where R/A Subs have been used in the past

MANUFACTURER SUGGESTS:

When using the N/G Permanent Tag Kits the amount of kits is determined by the casing or tubing size:

0” – 4.5” (1) Kit per connection

5” – 7 ” (2) Kits per connection

7 5/8” – 9 5/8” (3) Kits per connection

 

SUPREME SERVICES NOW OFFERS NATURAL GAMMA SUBS

N/G Subs are a replacement for the hazardous and costly R/A Subs. N/G Products are manufactured using a low natural radioactive source. In this form the Nuclear Regulatory Commission has deemed that N/G Products are exempt from licensing. 10 CFR 40 13 (c) provides that any person is exempt from regulation in this part and from the requirements for a license set forth in Section 62 of the Atomic Energy Act of 1954 to the extent that such person receives, possesses, uses, or transfers among other items.   In short N/G Products will not need special handling, special storage, and special transportation.

 HOW DOES IT WORK

 Although radioactive tag markers are not new, this concept is. The N/G Sub utilizes a NON-CONTROLLED NATURAL GAMMA-RAY substance. The N/G Sub, when used in conjunction with a gamma-ray scintillation tool, will provide approximately 200 to 600 gamma-ray counts per second as compared to 3600 to 5000 counts per second with the R/A material presently being used. With normal downhole formations emitting anywhere from 10 to 90 back ground counts per  second, the N/G Sub will provide more than enough counts for locating exact depth in the well bore.

APPLICATIONS

Tubing Conveyed Perforating (TCP)

Setting Sump Packers

Setting Downhole Assemblies

Any application where R/A Subs have been used in the past

N/G SUB SIZES AVAILABLE AT SUPREME SERVICES

2 3/8 PH6 and 8RD

2 7/8 PH6, 8RD, and CS

3 1/2 IF and PH6

4 1/2 IF, PH6, TSHD and HYDRIL 513


EXTREME TORQUE SUBS

4” XT 38

4" XT 39

4”XTM 38

4” XTM 40

5” 7/8 XT 57

5” 7/8 CTM 57

*With proper notice N/G Subs can be manufactured to meet any customers need

 

 

204 Industrial Ave C • Houma, LA 70363 • Tel: (985) 851-7465 Fax: (985) 851-2180
© Copyright 2011

Supreme Service & Specialty Co, Inc. All Rights Reserved